C-Joint

#2445

 

C-Joint

Two Component Floor Joint Sealer

MSDS
Product Information Sheet

Features

  • Easy to use – 1:1 by volume mix ratio
  • Color coded to ensure proper mixing ratio
  • Retains resiliency – does not become brittle with age
  • Excellent wear resistance
  • Semi-rigid to support heavy loads across the joint
  • 100% solids

Description

C-JOINT is a two component, 100% solids, heavy-duty epoxy joint filler for industrial floors. C-JOINT may be used for repairing spalls, cracks and damaged joints. It can also be used as a joint filler for industrial concrete floors subjected to hard-wheeled vehicles such as forklifts.

Applications

  • Cracks
  • Spalls
  • Damaged joints

Directions

Area must be clean and dry. Saw-cuts should be blown clean and dry to remove dust and debris.  Remove curing and sealing compounds. Stir both A & B components separately before mixing together. Mix thoroughly with a heavy duty, low speed drill fitted with a mixing paddle. Mix until a uniform gray color appears, and no streaks are evident. Apply with bulk caulking gun or pour from can. Fill joints flush to the top or slightly higher than the surrounding surface. To prevent C-Joint  from running through shrinkage cracks at bottom of joint, apply a maximum of ¼” of fine sand. A second pass prior to curing may be necessary due to the fact that all pour grade materials will “dish” or become concave. Remove all tape and clean spills and tools immediately with a suitable solvent such as xylene or lacquer thinner.

Pot life is 15-25 minutes.

Initial cure time 6-8 hours.

Traffic ready in 8-12 hours.

2 year shelf life.

Limitations: Do not apply when temperature is below 50°F. Do not use on true expansion joints, exterior joints, tooled joints, or joints subject to chemical exposure. Do not install in concrete less than 28 days old. Best results are obtained when applied at least 3-6 months after construction. Do not use compressible backer rod.

 

Health

2

Flammability

1

Reactivity

0

Personal Protection

G

 

  • Appearance: Part A White liquid of moderate viscosity | Part B Medium viscosity black liquid
  • Odor: Part A Almost odorless | Part B Ammonia

Contact UsRequest more Information

 

Product Guarantee: We guarantee all we sell to the complete satisfaction of our customer.  In the event a product we sell fails to meet our customer’s requirements, we offer a simple return procedure that is effective up to 30 days after the date of purchase.  For full credit on the unused portion, request a Return Authorization Number from our customer service department.  No returns will be accepted without an RA number. 

We cannot issue credit on any goods purchased more than 90 days previously.  All returns for reasons other than performance quality must be in original packaging and are subject to a 15% restocking charge plus freight charges. 

Any claims resulting from damages during shipment must be made no later than 48 hours after the shipment is received.