Anchor-It |
#2447 |
Two-Part Epoxy Anchoring System
MSDS
Product Information Sheet
Features
|
|
|
|
|
Description
ANCHOR-IT is a two-component, 100% solids, rapid setting, epoxy anchoring system packaged in easy-to-use 300 mL dual cartridges. This unique cartridge assures the correct portioning and thorough mixing of the epoxy, which is color-coded to assure that mixing is complete. ANCHOR-IT has a wide variety of uses, including setting of machine anchor bolts for load bearing applications. ANCHOR-IT adhesive and repair cartridge system is dispensed with #4225 cartridge handgun. This handheld, manually operated gun provides a convenient, cost effective method to accurately apply product with minimum waste.
Applications
|
|
|
|
|
|
Directions
Remove top caps and attach mixing nozzle and relating nuts. If using air compression, do not allow air pressure to exceed 65 PSI.
Pot life: 5-10 minutes
Mix ratio: 1:1.
Do not apply when temperature is below 33°F, or to latex-modified mortar or latex-modified concrete.
| A | B | |
| HEALTH | 2 | 3 |
| FLAMMABILITY | 1 | 1 |
| REACTIVITY | 0 | 0 |
| PERSONAL PROTECTION | G | G |
- Appearance: A: White paste; B: Black paste
- Odor: A: Almost odorless; B: Ammonia
Request more Information
Product Guarantee: We guarantee all we sell to the complete satisfaction of our customer. In the event a product we sell fails to meet our customer’s requirements, we offer a simple return procedure that is effective up to 30 days after the date of purchase. For full credit on the unused portion, request a Return Authorization Number from our customer service department. No returns will be accepted without an RA number.
We cannot issue credit on any goods purchased more than 90 days previously. All returns for reasons other than performance quality must be in original packaging and are subject to a 15% restocking charge plus freight charges.
Any claims resulting from damages during shipment must be made no later than 48 hours after the shipment is received.
