Ice Fighter |
# 3463 |

Ice Melting Compound
Documents:
Features
|
|
|
|
|
Description
ICE FIGHTER is an ice melting compound that consists of multi-color crystals of calcium, potassium, and sodium chlorides that are fortified with UREA MAX. It is effective all the way down to -21°F. ICE FIGHTER is easy to apply and economical because you can see the coverage, which helps to avoid over application. ICE FIGHTER is safe for use on properly cured concrete and anywhere traction is needed to reduce risk of injury.
Applications
|
|
|
|
|
|
Directions
For best results, use a cup, scoop, or broadcast spreader to apply. Spread product sparingly and evenly (1.5 to 3 oz. per square yard), then remove melted ice/snow or slush. Apply shortly after a snow begins to assure easy removal of snow and prevent ice build-up.
Note: If snow depth is more than 2 inches, plow or shovel first, then apply deicer to melt any remaining ice layer or hard-packed snow.
Notice: As with all deicers, use only on properly placed and cured concrete. Do not use on porous or improperly cured concrete, or concrete less than one year old. The cycle of freezing and thawing by natural weather elements can cause damage to concrete. The uses of an ice melter increase these cycles, and are factors over which we have no control. Use of deicers on porous brick, mortar joints, flagstone, and pre-cast or pre-stressed concrete is not recommended. All deicers can be harmful when applied directly to trees, shrubs, flower beds or grass. Remove any melted ice, snow, and slush from vegetation area. Ice melting agents that are applied at much greater rates than recommended may interfere with traction or footing, and may cause tracking indoors. Use of this product must be at the consumer’s risk. Do not use where product might come in contact with an airplane.
| HEALTH | 1 |
| FLAMMABILITY | 0 |
| REACTIVITY | 0 |
| PERSONAL PROTECTION | B |
- Appearance: White crystals with blue and red pellets
- Odor: Odorless
Product Guarantee: We guarantee all we sell to the complete satisfaction of our customer. In the event a product we sell fails to meet our customer’s requirements, we offer a simple return procedure that is effective up to 30 days after the date of purchase. For full credit on the unused portion, request a Return Authorization Number from our customer service department. No returns will be accepted without an RA number.
We cannot issue credit on any goods purchased more than 90 days previously. All returns for reasons other than performance quality must be in original packaging and are subject to a 15% restocking charge plus freight charges.
Any claims resulting from damages during shipment must be made no later than 48 hours after the shipment is received.
